O Scale Trains Magazine Discussion Forums

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.





Pages: [1]
Author Topic: Next project in the queue
Martin
Administrator
Posts: 887
Post Next project in the queue
on: December 29, 2019,
Quote

Off to the next box in the queue in the shop. It's an old Bob Peare box but I'm pretty sure that the parts inside did not originate from a Peare kit.

Looks like someone started to lay out a side door caboose. Scribed siding is a plywood; loads of fun opening up holes for the windows and doors. Well, I'll have to spent a bit of time excavating window and door castings from the parts bins and see what I have that is suitable and then get to work with the scalpels, 😉 😉

And, that floor and roof are not going to work at all; wrong contour. Looks like they came from an old Picard kit. Toss those into the tub to go to the next O scale meet. And, I've got an extra cupola in styrene(?) and a pair of wood airtanks(?)..... Into the parts bins with those...

Image

Want a balloon?

Martin
Administrator
Posts: 887
Post Re: Next project in the queue
on: January 12, 2020,
Quote

Got the sides roughed out, holes cut out for everything, and doors fabricated and installed.

Image

On to the cupola and ends...

Want a balloon?

Tom-
Dempsey

Posts: 121
Post Re: Next project in the queue
on: January 14, 2020,
Quote

So the "freight" doors are from dimensional lumber?

Martin
Administrator
Posts: 887
Post Re: Next project in the queue
on: January 15, 2020,
Quote

Yes, the doors were made up from scribed siding and dimensional lumber. The parts around the door opening were made from 1/4 round special shape lumber that I still have a small stock of in the shop. Not sure what I'll do when that runs out. Not sure if Northeastern still makes very much this stuff now.

Want a balloon?

Tom-
Dempsey

Posts: 121
Post Re: Next project in the queue
on: January 16, 2020,
Quote

Before I put the wood shop in storage, I tried to make some for my own use out of doweling on the vertical band saw. Very difficult and mountains of "factory seconds".

Martin
Administrator
Posts: 887
Post Re: Next project in the queue
on: January 17, 2020,
Quote

I looked and found that Northeastern still lists 1/4-round in at least 4 small sizes so all is not lost as yet. 😉

Want a balloon?

Tom-
Dempsey

Posts: 121
Post Re: Next project in the queue
on: January 18, 2020,
Quote

That's a good thing, I think I'm at least two years away from setting up for full production again.

Martin
Administrator
Posts: 887
Post Re: Next project in the queue
on: January 19, 2020,
Quote

Got the car assembled around a wood block floor that was skinned with scribed siding and then framing was added onto that surface.

Image

Image

Image

Want a balloon?

Tom-
Dempsey

Posts: 121
Post Re: Next project in the queue
on: January 19, 2020,
Quote

Please keep the pictures coming, I have a couple of caboose projects in mind down the road and they're definitely going to be scratch builds, no kits in site even close, and I absolutely could never bring myself to spend $300.00 on a brass caboose.

Martin
Administrator
Posts: 887
Post Re: Next project in the queue
on: January 21, 2020,
Quote

..........could never bring myself to spend $300.00 on a brass caboose.

Sadly, I will confess that I have done just that, but I sold off 3 other brass cabooses to make it a zero sum financial deal. Actually, it was better than that! I also saved myself from hacking up at least one of the 3 to make a version of the expensive one and I also recovered 2/3 of the space that the other 3 were occupying. That space part of the equation might be the most important variable!

Want a balloon?

Martin
Administrator
Posts: 887
Post Re: Next project in the queue
on: January 26, 2020,
Quote

1st coats of paint on the body and the window castings so I could glaze them all.

Image

Roof and cupola assembly next....

Want a balloon?

Tom-
Dempsey

Posts: 121
Post Re: Next project in the queue
on: January 26, 2020,
Quote

Doing an interior also?

Martin
Administrator
Posts: 887
Post Re: Next project in the queue
on: January 26, 2020,
Quote

Not this time.

Want a balloon?

Martin
Administrator
Posts: 887
Post Re: Next project in the queue
on: February 2, 2020,
Quote

Closing up the roof a board at a time....

Image[/url]

Want a balloon?

Tom-
Dempsey

Posts: 121
Post Re: Next project in the queue
on: February 2, 2020,
Quote

Still watching here

Martin
Administrator
Posts: 887
Post Re: Next project in the queue
on: February 9, 2020,
Quote

Roof on, cupola assembled with roof on (needs a few trim boards), and all test fitted together.

Image

Image

Image

Got to wrap up the cupola, paint it, and get the windows glazed.

Want a balloon?

Martin
Administrator
Posts: 887
Post Re: Next project in the queue
on: February 17, 2020,
Quote

Got the cupola just about ready to attach now; trim added, painted, glazed, roof and grabs installed...

Image

Want a balloon?

Martin
Administrator
Posts: 887
Post Re: Next project in the queue
on: February 23, 2020,
Quote

Lots done!

Image

Image

Image

Image

Want a balloon?

Pages: [1]